Please use the Contact Us feature to reach us.
Menu Icon

Nautical Jewelry and Boating Gifts available.

  • Description
  • Marine Downlight - Emden-Medium LED, Stainless Steel, Warm White-Red, 10-30VDC
  • Slave (Dimmable with Master), IP67
  • A robust precision-made dimmable Bi-Color LED downlight fixture built for harsh environments.
  • This "slave" model from the Emden family features both red and white operation. For dimming control of both colors, a single Emden bi-color "master" must be used in the circuit. In this case a single (or multiple) single throw momentary push button switche(s) are used to control and synchronize the entire circuit. For basic 3-position (white/off/red) on/off control without dimming, a "master" is not required.
  • For dimmed circuit: To switch the lights on or off, press briefly on the remote momentary switch. Brightness can be adjusted by holding down the switch. To reverse the dimming phase, release the switch briefly and press again within one second. The LED light can be dimmmed to a minimum (10%) or pushed to maximum bright-ness (100%), and will remain at that respective level. The light keeps this brightness until the next change. A double-click changes between the red and white light. Lights switched off can always be switched on to the red light with a double click. If Emden single color (white) slave lights are used in the group circuit, they will completely turn off when switching to the red mode.
  • Engineered to the highest standards and milled from marine grade 316 stainless steel, Emden will provide years of maintenance free top performance. Completely sealed from the elements, Emden may be installed in areas where water exposure is the norm. Emden's low profile bezel edge and high polish finish provide a style element that will surely be appreciated by the meticulous yacht owner and his/her guest

Features:

  • Machined 316 stainless steel construction
  • Integrated 10-30VDC constant current LED driver
  • Switch between warm white and red LED illumination
  • Full bi-color dimming when paired with and Emden bi-color master

Specifications:

  • Trim Ring (Bezel) Finish/Material: Polished stainless steel
  • Housing Finish/Material: Polished stainless steel
  • Lens Material: Frosted glass
  • Trim Ring (Bezel) Dimensions: 3.35 inch (85mm)
  • Cut-Out Dimensions: 2.36 inch (60mm)
  • Recessed Depth: 0.67 inch (17mm)
  • Input Voltage: 10-30VDC
  • Power Consumption: 3W
  • Driver: Integrated
  • Output Color: Warm white/red
  • Luminous Flux: 175 lm
  • Correlated Color Temperature (CCT): 3000K/Red
  • Color Rendering Index (CRI): 85
  • Beam Angle: 100°
  • Lifetime Hours: 50000
  • Dimmer Compatibility: See Emden Bi-Color Master (ILPB23303505)
  • Dimmer Control Interface: N/O single throw momentary switch
  • Mounting Method: Screws
  • Install Location: Wet or dry locations
  • Ingress Protection: IP67
  • Class: Class III
  • Electrical Protections: Transients, reverse polarity
  • Certifications & Compliance: CE, ROHS
  • Manufacturer: Prebit
  • Warranty: 3 Years / 1 Year Finish

ATTENTION CALIFORNIA RESIDENTS

www.P65Warnings.ca.govWARNING: Cancer and Reproductive Harm

Click here for Dimensional Drawing

Contact us Now

Customer Service has always been important to us and we always seek out the most efficient way to communicate with you.

Please use this form to contact us regarding new product questions or if you are checking the order status of an existing order.

This allows us to research your question and provide answers during the daytime, evenings or weekends.

Thank you for taking the time to contact us!

×