Marine Downlight - Emden-Medium LED, Red-Warm White, 10-30VDC

• Marine Downlight - Emden-Medium LED, Stainless Steel, Warm White-Red, 10-30VDC
• Master (Dimmable), IP67
• A robust precision-made dimmable Bi-Color LED downlight fixture built for harsh environments.
• This "master" model from the Emden family features both red and white on/off and dimming operation when wired to a single throw momentary push button switch. Combine with up to 15 Emden bi-color "slaves" and control the entire circuit with unlimited remote push button switches. To switch the lights on or off, press the push-button switch briefly. Brightness can be adjusted by holding down the switch. To reverse the dimming phase release the switch briefly and press again within one second. The LED light can be dimmed to a minimum (10%) or pushed to maximum brightness (100%), and will remain at that respective level. The light keeps this brightness until the next change. A double-click changes between the red and white light. Lights switched off can always be switched on to the red light with a double click. If Emden single color (white) slave lights are used in the group circuit, they will completely turn off when switching to red mode.
• Engineered to the highest standards and milled from marine grade 316 stainless steel, Emden will provide years of maintenance free top performance. Completely sealed from the elements, Emden may be installed in areas where water exposure is the norm. Emden's low profile bezel edge and high polish finish provide a style element that will surely be appreciated by the meticulous yacht owner and his/her guests.

Features:

• Machined 316 stainless steel construction
• Integrated 10-30VDC constant current LED driver
• Switch between warm white and red LED illumination
• Full bi-color dimming via remote N/O momentary switch
• Controls up to 15 Emden bi-color "slaves"

Specifications:

• Trim Ring (Bezel) Finish/Material: Polished stainless steel
• Housing Finish/Material: Polished stainless steel
• Lens Material: Frosted glass
• Trim Ring (Bezel) Dimensions: 3.35 inch (85mm)
• Cut-Out Dimensions: 2.36 inch (60mm)
• Recessed Depth: 0.67 inch (17mm)
• Input Voltage: 10-30VDC
• Power Consumption: 3W
• Driver: Integrated
• Output Color: Warm white/red
• Luminous Flux: 175 lm
• Correlated Color Temperature (CCT): 3000K/Red
• Color Rendering Index (CRI): 85
• Beam Angle: 100°
• Lifetime Hours: 50000
• Dimmer Compatibility: Integrated (requires momentary switch)
• Dimmer Control Interface: N/O single throw momentary switch
• Mounting Method: Screws
• Install Location: Wet or dry locations
• Ingress Protection: IP67
• Class: Class III
• Electrical Protections: Transients, reverse polarity
• Certifications & Compliance: CE, ROHS
• Manufacturer: Prebit
• Warranty: 3 Years / 1 Year Finish

ATTENTION CALIFORNIA RESIDENTS

WARNING: Cancer and Reproductive Harm

Click here for Dimensional Drawing